Software Configuration; Removing The Ufm Board; Required Tools - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

System board and components

14.2.1.5 Software configuration

The UFM delivery set includes the "Recovery Tool CD" to setup the ESXi
configuration. Proceed as follows:
Ê Switch on the server.
Ê Right after switching on the server, insert the "Recovery Tool CD" into the
DVD drive and close the drive tray.
Ê The server should now boot from the "Recovery Tool CD".
Ê Follow the on-screen instructions.

14.2.2 Removing the UFM board

Field Replaceable Units (FRU)
Average task duration: 5 minutes

14.2.2.1 Required tools

Preliminary and concluding steps: tool-less
●
Removing the UFM:
●
– Phillips PH0 / (+) No. 0 screw driver
460 Upgrade and Maintenance Manual
RX300 S7