11.4.4 Concluding steps
Perform the following procedures:
"Installing processor heat sinks" on page 325
Ê
"Installing the air duct" on page 74
Ê
"Mounting the server cover" on page 76
Ê
"Sliding the server into the rack" on page 80
Ê
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server cover" on page
"Connecting the server to the power source" on page 81
Ê
"Updating or recovering the system board BIOS and iRMC" on page 92
Ê
"Enabling SVOM boot watchdog functionality" on page 101
Ê
"Enabling BitLocker functionality" on page 107
Ê
RX300 S7
Upgrade and Maintenance Manual
76.
Processors
323