Removing The Front Panel Cage - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

Front panel

13.4.1.3 Removing the front panel cage

Ê Disconnect all cables from the modules that are installed in the front panel
cage.
– Front panel cable:
– Front LAN cable:
– Front VGA cable:
– ODD cable:
– LSD cable:
Multicage
Figure 280: Removing the front panel cage
Ê Remove the two screws.
Ê Push the front panel cage out of the chassis frontward.
Ê Remove the installed modules.
– "Removing the front panel module" on page 410
– "Removing the ODD" on page 352
446 Upgrade and Maintenance Manual
RX300 S7