Installing A Fan Module; Concluding Steps - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

System fan
8.1.4

Installing a fan module

Figure 75: Installing a fan module
Ê Insert the fan module as shown.
Ê Press down on the fan module until it locks.
8.1.5

Concluding steps

Perform the following procedures:
"Mounting the server cover" on page 76
Ê
"Sliding the server into the rack" on page 80
Ê
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page
Ê Reconnect all external cables.
"Connecting the server to the power source" on page 81
Ê
"Switching on the server" on page 82
Ê
180
rx300s7-fan-out-1-6134.png
Upgrade and Maintenance Manual
77.
RX300 S7