9.7.1.2
General instructions
Ê Place the controller on the mounting tabs on the slot bracket.
Ê Secure the slot bracket to the controller with two M3 x 4.5 mm screws.
Removal is carried out in reverse order.
I
For a more detailed description on how to install a slot bracket on a
controller, please refer to section
9.7.1.3
Network adapter D2735
Figure 121: Network adapter D2735 - Mounting the slot bracket (A)
Ê Place the controller on the mounting tabs on the slot bracket (1).
Ê Carefully shift the slot bracket towards the controller (2) until the plug shells
engage with the cut-outs in the slot bracket connector panel (see close-up).
RX300 S7
Upgrade and Maintenance Manual
Expansion cards and backup units
"Network adapter D2735" on page
255.
255