Replacing The Front Usb3.0 Connector - Fujitsu PRIMERGY RX2540 M4 Upgrade And Maintenance Manual

14.4.3 Replacing the front USB3.0 connector

Upgrade and Repair Unit
(URU)
Tools: Phillips PZ2 screw driver / hexagon screw driver 5 mm
14.4.3.1 Preliminary steps
"Suspending BitLocker functionality" on page 91
Ê
"Locating the defective server" on page 53
Ê
"Shutting down the server" on page 55
Ê
"Disconnecting the power cord" on page 56
Ê
"Getting access to the component" on page 58
Ê
"Removing the fan holder" on page 233
Ê
14.4.3.2 Removing the front panel module
Ê Remove the front panel module, see section
module" on page
14.4.3.3 Removing the front USB3.0 connector
Remove the front USB3.0 connector, see
Ê
USB3.0 connector" on page
14.4.3.4 Installing the new front USB3.0 connector
Ê Install the new front USB3.0 connector, see section
USB3.0 connector" on page
14.4.3.5 Installing the front panel module
Ê Install the front panel module, see section
module" on page
RX2540 M4
438.
458.
454.
438.
Upgrade and Maintenance Manual
Hardware: 15 minutes
"Replacing the front panel
section"Removing the front
"Installing the front
"Replacing the front panel
Front panel
459