Establishing Communication; Connecting By Telephone Line; Connecting By Ethernet Cable - VeriFone V205c Installation Manual

S
ETUP

Establishing Communication

Establishing
Communication
Connecting by
Telephone Line
WARNING
Connecting by
Ethernet Cable
18
V205 I
C NSTALLATION
3
If you are finished replacing or inserting cards, put the rear cover back in
place.
You can connect the V205c to your network by using the following options:
•

Connecting by Telephone Line

•
Connecting by Ethernet
Connect the telephone cord to the communication port on the terminal, then route
it directly to a telephone wall jack (see
the line is dedicated to the terminal.
Figure 8 Direct Telephone Connection
To reduce the risk of fire, use only No. 26AWG or larger UL Listed or CSA
Certified Telecommunication Line Cord.
Connect the ethernet cable to the ETH port on the terminal, then route it directly to
a network jack (see
Figure 9 Ethernet Connection
G
UIDE
Cable.
Figure
Figure 9). This is a direct connection to your network.
8). This is a direct connection and