Cable Connections; Attaching A Cable Connector To The P200; Connection To Another Verifone Terminal - VeriFone P200 Installation Manual

S
ETUP

Cable Connections

NOTE
Cable
Connections
WARNING
Attaching a Cable
Connector to the
P200
Connection to
Another Verifone
Terminal
P200/P200 P I
16 LUS NSTALLATION
Multi-media function (video playback or audio function) has to be switched off
•
by user or customer app when CTLS payment mode is activated. Other
modes of payment like smart card and MSR payment can be supported.
CTLS payment mode is defined as the state of the device where RF transmission
is broadcasting to allow for a CTLS payment. This is activated either during the
scanning of items or at the completion of scanning items during the checkout
process, depending on how the application sets it up. As soon as checkout is
complete, the device exits CTLS payment mode and remains off until activated for
the next checkout.
The P200 has several cabling scenarios, depending on what it connects to:
Connection to Another Verifone
1
RS-232 Connection Using an External Power
2
Direct USB Connection.
3
Powered USB Connection.
4
Ethernet Connection with External Power
5
Turn off or unplug the terminal when connecting or disconnecting the device to
avoid device memory corruption and data loss. Refer to the controlling device
instructions for any terminal-specific warnings.
Before going into each cabling scenario, the cables first have to be attached to the
P200. Follow steps 1-2 in
the compartment door then attach the 28-pin connector of the cable to the
terminal.
A
Figure 4 Using the 28-Pin Connector
P200 can be powered by another terminal in two ways:
Serial Connection
•
USB Connection
•
G
UIDE
Terminal.
Brick.
Installing or Changing MSAM/uSD Card
B
Brick.
section to open
C