Call Operator / Attendant - Comdial DX-80 Installation & Maintenance Manual

Call Operator / Attendant

The extension that is programmed as the Attendant may receive multiple internal calls via the programmed Operator
Code. The Operator Code is "0" at default.
Related Features
Flexible Numbering Plan
Related Programming
System Application - Operator Code
System Resource - Attendant
Default Settings
System Application – Numbering Plan – Operator Code – "Length" is set to 1 (one).
System Application – Numbering Plan – Operator Code – "Leading" is set to 0 (zero).
System Resource – Attendant – Tenant Group "1" is set to extension 101.
System Resource – Attendant – Tenant Group "2," & "3" is set to Null (none).
System Resource – Attendant – Alternate - Tenant Group "1,""2," & "3" is set to Null.
Conditions
a) The Operator Code is in addition to the default assigned three-digit intercom number for the extension.
b) The attendant three-digit extension number can be assigned to any feature button.
Programming Abstract
•
Program the Operator Code Length if the necessary code should be longer than one digit.
•
Program the Operator Code if the length is changed or some other digit is necessary to reach the system
attendant.
•
Program the extension to be assigned the system Attendant for each of the tenant groups.
•
Program the extension to be assigned the system Alternate Attendant for each of the tenant groups.
Programming via the DET (Digital Extension Terminal)
back next
Note: [ ], [ ], [
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
++++++++
"
show
•
Press [ ]. The DB Item Select screen displays.
Program Operator Code (Index 08-09-14):
•
Input:
•
08-09-14-01 to program Operator Code – Length (the length of this code may be 1-4 digits).
Or...
•
08-09-14-02 to program the Operator Code – Leading Digit.
save
•
Press [ ]. This advances to the selected database item.
chg
•
Press [ ] to change the contents of this database item.
•
For Length: press [
•
For Leading Digit: input the actual code necessary for the attendant.
For example, if Length is set to "1," the entire code is the "Leading Digit" (typically "0.") If the "Length" is "2,"
P7290 IMM
DX-80 I
NSTALLATION AND
show chg bksp
], [ ], [ ], and [
." (Note: This eight-character password can be changed.)
chg
] until the appropriate number of digits to dial for the operator code displays.
3-34
M M 03/01
AINTENANCE ANUAL
Tenant Group
save
] are LCD interactive button operations. Use the
!+*
and then enter the DB Admin password
0