•
Select Programming from the PC-DBA menu.
Program the appropriate extension for the Predetermined Call Forward modes required:
•
Use ¢£¤¥ to highlight "Extension." Then press «.
•
Use ¢£¤¥ to highlight "Predetermined FWD." Then press «.
•
Use ¢£¤¥ to highlight "Wrong # Dest.," "Predef FWD Busy Dest.," or "Predef FWD NoAns Dest." for the
appropriate extension (extensions are listed along the left side of the screen under the column "DIR#").
•
Press « select this database item for change.
•
Input the destination directory number (extension or UCD/Hunt Group) then press «.
Note: frequently the destination for a predefined forward – no answer condition will be to the VM
UCD/Hunt Group, that directory number is 433.
•
When all changes are made press the ° (escape) key to exit this database programming screen. You will
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
•
Press ° (escape) again to return to the Database Programming menu.
Program the Predefined Forward Time as required:
•
Use ¢£¤¥ to highlight "Call Handling." Then press «.
•
Use ¢£¤¥ to highlight "Category 3." Then press «.
•
Use ¢£¤¥ to highlight "Predefined Forward Time."
•
Press « until the desire time displays.
•
When all changes are made press the ° (escape) key to exit this database programming screen. You will
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
•
Press ° (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Call Park / Call Park Answer
This feature allows you to "Park" a call at any extension. It also is used to retrieve a parked call from any extension.
Calls are parked and retrieved by dialing the Call Park code (Feature 73) followed by the extension number where the
call is to be/has been parked.
P7290 IMM
DX-80 I
M
NSTALLATION AND
AINTENANCE
3-48
M
03/01
ANUAL
!73