Co Line Ring Type Assignment - Comdial DX-80 Installation & Maintenance Manual

•
Use ¢£¤¥ to highlight "CO Line." Then press «.
• Use ¢£¤¥ to highlight "Answering Position." Then press «.
•
Use ¢£¤¥ to highlight the Day Member or Evening ringing destination for the CO Line (CO Line
numbers are listed vertically along the left side of the screen). Then press «.
•
Input the CO Line, Hunt Group or Virtual Number directory number where ringing for this CO Line is to be
assigned.
• Press «. The database item is temporarily stored.
•
Use ¢£¤¥ to highlight the next ringing destination to be programmed.
•
Repeat the programming process for all CO Lines and destinations for the mode (Day/Evening).
• When all changes are made press the ° (escape) key to exit this database programming screen. You will
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
• Press ° (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

CO Line Ring Type Assignment

The DX-80 system provides eight types of ringing for indication of specific CO Line ringing. Any CO Line may be
allocated one of the available Ring Types. When this feature is used, the specific ring type assigned to the CO Line is
the ring type heard when that CO Line rings. This feature is helpful when CO Lines are arranged into groups for
specific call handling. The Ring Type indication helps to identify the CO Line and the group to which it belongs.
Related Features
Extension – Ring Type
Related Programming
CO Line – CO Line Ring Type
Conditions
a) CO Line Ring Type overrides Extension Ring Type settings.
b) When a CO Line Ring Type is set to "0," the Extension Ring Type is used.
Default Settings
All CO Lines are assigned Ring Type 0. (Range is 0-8.)
Programming Abstract
Program CO Lines for the Ring Type.
Programming via the DET (Digital Extension Terminal)
back next
Note: [ ], [ ], [
three buttons below the LCD display to actuate the associated operation.
P7290 IMM
DX-80 I
NSTALLATION AND
show chg bksp
], [ ], [ ], and [
3-75
M M 03/01
AINTENANCE ANUAL
CO Line – Ring Assignment
save
] are LCD interactive button operations. Use the