Extension Password - Comdial DX-80 Installation & Maintenance Manual

Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing «.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press «.
• Use ¢£¤¥ to highlight "Extension." Then press «.
•
Use ¢£¤¥ to highlight "Category 1." Then press «.
•
Use ¢£¤¥, ³´to highlight "Paging Group" for the extension.
• Press « until the necessary Page Group number displays for this extension.
•
Continue making other programming changes as required.
•
When all changes are made press the ° (escape) key to exit this database programming screen. You will
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
• Press ° (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

Extension Password

All extensions of the DX-80 system have an associated User Password. Passwords are used to facilitate Phone
Lock, Call Forward Remote and Attendant features. Password length is system programmable from four to eight
characters.
Related Features
Call Forward – Remote
Phone Lock/Unlock
Attendant Administration
Related Programming
System Resource - User Password - Length
System Resource - User Password - Password
Operation
Refer to the specific feature for operation.
Default Settings
System Resource – User Password: Extension 101 is set to "9999," All other extensions are set to "0000."
(Range is: any alphanumeric characters up to the allocated User Password Length.)
System Resource – User Password – Length is set to "4." (Range is: 4-8.)
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
3-113
M 03/01
ANUAL
Caller ID - Call Table
Direct Inward System Access (DISA)