•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press «.
•
Use ¢£¤¥ to highlight "CO Line." Then press «.
•
Use ¢£¤¥ to highlight "Category 2." Then press «.
•
Use ¢£¤¥ to highlight the database item "CO Ring Type" for the CO Line to be changed.
•
Press «
.
Each time that enter is pressed the value of this database item is updated.
•
When all changes are made press the ° (escape) key to exit this database programming screen. You will
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
•
Press ° (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Distinctive Ringing – Extension
Distinctive Ringing – Extension provides a means for denoting one ringing extension from another. There are eight
(8) choices are available for an extension to choose.
Related Features
CO Line – Answering Position
Distinctive Ringing – CO Line
Default Settings
Distinctive Ringing is set to 1. (Range is 1~8.)
Operation
1.
Press the Distinctive Ringing Tone code
2.
The current Tone is heard and the setting displays
chg
3.
Press [
] until the appropriate tone is heard and displayed.
Conditions
a)
CO Line – Distinctive Ringing overrides an extensions setting of Distinctive Ringing.
b)
The Distinctive Ringing code may be programmed on any available Feature button.
Default Settings
CO Line – Category 2 – CO Ring Type is set to "0" for all CO Lines. (Range is: 0-8.)
P7290 IMM
DX-80 I
M
NSTALLATION AND
AINTENANCE
!)7
RING TYPE
:1
chg
3-106
M
03/01
ANUAL
Transfer
.
)7