Auxiliary Lamp / Led Status Bar - Comdial DX-80 Installation & Maintenance Manual

!
1. Press [9][5]. The display will show the current selection. ("ICM" = Intercom).
icm
2. Press [ ] to select Intercom dial tone as the appropriate operation when the handset is lifted.
co
3. Press [ ] to select a specific CO Line number to access when the handset is lifted. The system will prompt
you for the CO line directory number to select.
4. Input the valid CO line Directory Number (e.g., 740 for CO Line 1, 755 for CO line 16).
save
5. Press [ ].
co gp
6. Press [ ] to select a specific CO line group number to access when the handset is lifted. The system
will prompt you for the CO Line Group directory number to select.
7. Input the valid CO Line Group Directory Number (e.g., 9 for CO Line Group 1, 800 for CO Line Group 2, 806
for CO Line Group 8).
save
8. Press [ ].
9. Confirmation tone is heard when the selection is made after [
Operation
Lift the handset; the selection is accessed.
Conditions
a) The system will not allow invalid directory numbers to be programmed during setup.
b) When a CO Line or CO Line Group is programmed for Automatic Selection that CO line or group must be
programmed as available for access by the extension in the system programming.
c) The feature code (
Default Setting
Default Setting: ICM
Programming Abstract
•
Program CO Line Group directory numbers as necessary.
•
Program CO Line directory numbers as necessary.
•
No specific programming is required to set up or operate Automatic Selection.

Auxiliary Lamp / LED Status Bar

Each Digital Speakerphone is equipped with a dual colored LED Auxiliary Lamp/LED Status Bar to assist users in
recognizing the extensions' status. The LED will operate and indicate active CO line ringing, Intercom ringing, Mute,
Message Waiting, Speakerphone/Headset Mode and Call Forward conditions.
Operation
The Auxiliary Lamp/LED Status Bar will operate and give visual indications as follows:
Flash Rate
Fast 1
Slow 2
Steady 3
Conditions
a) The lamp may have more than one indication flashing or steady at one time as features are utilized in the
system. Both colors of LED (green and red) may be lit at the same time to indicate more than one feature or
function is active.
b) The Call Forward, steady green indication may be turned off via Attendant Administration programming.
This is helpful if a permanent call forward option such as Voice Mail forwarding is required at an extension
and the user chooses not to have a the lamp constantly lit.
Default Setting
All LED indications active.
P7290 IMM
DX-80 I
NSTALLATION AND
!
95) may be programmed under a flexible button on a Digital Speakerphone.
Priority Red Lamp
Incoming CO Line Ringing Incoming Intercom Ringing
Mute Message Waiting
Speakerphone/Headset in use
3-30
M M 03/01
AINTENANCE ANUAL
save
] is pressed.
Green Lamp
Call Forward