Call Operator / Attendant - Comdial DX-80 Installation & Maintenance Manual

Related Programming
CO Line - Call Abandon, Route, and Answering Position
Call Handling - XFER_B Recall
Operation – Setup
To deny Busy Ring:
!,2
Press
Confirmation tone will be heard, and the display will read:
To allow Busy Ring:
!,2
Press
Confirmation tone will be heard and the display will read:
Conditions
This feature may be programmed (F#3) under a flexible button on the Digital Speakerphone. No LED's will
be in use and the button can be depressed and toggled to allow/deny this feature.

Call Operator / Attendant

The extension that is programmed as the Attendant may receive multiple internal calls via the programmed Operator
Code. The Operator Code is "0" at default.
Related Features
Flexible Numbering Plan
Related Programming
System Application - Operator Code
System Resource - Attendant
Default Settings
System Application – Numbering Plan – Operator Code – "Length" is set to 1 (one).
System Application – Numbering Plan – Operator Code – "Leading" is set to 0 (zero).
System Resource – Attendant – Tenant Group "1" is set to extension 101.
System Resource – Attendant – Tenant Group "2," and "3" is set to Null (none).
System Resource – Attendant – Alternate - Tenant Group "1,""2," and "3" is set to Null.
Conditions
a) The Operator Code is in addition to the default assigned three-digit intercom number for the extension.
b) The attendant three-digit extension number can be assigned to any feature button.
Programming Abstract
•
Program the Operator Code Length if the necessary code should be longer than one digit.
•
Program the Operator Code if the length is changed or some other digit is necessary to reach the system
attendant.
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
BUSY RING DENY
BUSY RING ALLOW
3-36
M
ANUAL
Tenant Group
0