Modem (Optional Mdm) - Comdial DX-80 Installation & Maintenance Manual

Modem (Optional MDM)

The DX-80 system can be equipped with an optional internal modem for DX-80 Remote PC-DBA Programming
support. When equipped, the Modem Module provides a dedicated communications path between the system
processor and PC-DBA. This communications path does not require use of analog port system resources.
Related Features
Database Administration via PC-DBA
Related Programming
System Resource - Modem and Serial Port
Conditions
Modem speeds are 1200 bps/ 2400 bps.
Default Settings
System Resource – Built-in Modem – DIR. No. (directory number) is set to "199."
System Resource – Built-in Modem – Baud Rate is set to "2400."
Programming Abstract
•
Change the modem directory number to the appropriate number.
•
Change the modem operating baud rate if the application requires this change.
Programming via the DET (Digital Extension Terminal)
back next
Note: [ ], [ ], [
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
++++++++
"
show
•
Press [ ]. The DB Item Select screen displays.
•
Input 04-15. Then press [
show
•
Press [ ]. This advances to the Built-in Modem – Directory Number programming screen.
•
To change the modem directory number, press [
•
Input the new directory number that is to be assigned to the modem resource. (The directory number
must be from those designated for Extension Directory Numbers.)
•
Press [save].
next
•
Press [ ]. This advances to the Built-in Modem – Baud Rate programming screen.
chg
•
Press [ ] until the appropriate baud rate displays.
•
Press to return to the previous menu level or press
screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing «.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press «.
•
Use ¢£¤¥ to highlight "System Resources" and then press «.
P7290 IMM
DX-80 I
NSTALLATION AND
show chg bksp
], [ ], [ ], and [
." (Note: This eight-character password can be changed.)
save
]. This advances to the Built-in Modem programming screen.
3-171
M M 03/01
AINTENANCE ANUAL
save
] are LCD interactive button operations. Use the
!+*
and then enter the DB Admin password
chg
].
to return to the DB Item Selection