Conference, Meet Me - Comdial DX-80 Installation & Maintenance Manual

Programming via the DET (Digital Extension Terminal)
back next
Note: [ ], [ ], [
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
++++++++
"
show
•
Press [ ]. The DB Item Select screen displays.
•
Input 02-740~755-08 then press [save]. The CO Line Type displays for the CO Line selected.
•
Press [chg] until the appropriate CO Line Type displays.
•
Press (up or down) to return to the DB Item Select screen and another CO Line number for
programming or exit the program mode.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing «.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press «.
•
Use ¢£¤¥ to highlight "CO Line." Then press «.
•
Use ¢£¤¥ to highlight "Category 1." Then press «.
•
Use ¢£¤¥ & ³´ to highlight the CO Line Type for the CO Line to be changed.
• Press until the « appropriate value displays.
•
When all changes are made press the ° (escape) key to exit this database programming screen. You will
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
•
Press ° (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

Conference, Meet Me

Conference is used join telephone connections together. Meet Me Conference simplifies the setup process by
assigning designated system resources as conference destinations. The result is eight separate conference locations
that are joined by dialing the location number. Callers can easily be transferred to these locations. Users may simply
dial the location number. Outside parties can join the conference via the automated attendant simply by dialing the
location number at the auto attendant greeting.
A programmable Conference Tone may be enabled or disabled so that entry into a conference is enunciated with an
alter tone or entered into without an alert tone.
P7290 IMM
DX-80 I
NSTALLATION AND
show chg bksp
], [ ], [ ], and [
." (Note: This eight-character password can be changed.)
3-81
M M 03/01
AINTENANCE ANUAL
save
] are LCD interactive button operations. Use the
!+*
and then enter the DB Admin password
390 ~ 397