Feature / Directory Number Lookup - Comdial DX-80 Installation & Maintenance Manual

2. Enter the extension password then press [show]. The display prompts for confirmation:
3. Press [go]. The operation is complete and confirmation tone is heard.

Feature / Directory Number Lookup

There are many features and codes in the DX-80 system. At times it may be difficult to remember the code for the
necessary feature. This feature code directory was implemented to aid in accessing the many features of the DX-80.
When invoked, the Feature/Directory Number Lookup can be used to find the directory number and/or Feature Code
and/or Suffix Codes required to operate the various system features.
Related Features
Flexible System Numbering Plan
Operation
1. While the telephone is idle (no call activity), press
2. To find a system Directory Number, press [
don't see the system resource listed press [
LCD button. (For example, to show the directory number assigned to CO Line Groups, press [
3. To find a system Feature Access Code, press [
(Note: All codes in this list require that the
4. To find a Suffix Code, press [
displays.
back
5. Use the [ ] and [
6. Use to return to a previous menu level.
7. Go off-hook them on-hook (or press the ON/OFF button twice) to exit Feature/Directory Number Lookup.
List of Codes
Directory Numbers (these can be changed in programming):
Co gp (CO Line Group)
Page (Paging)
EXT PAGE (External)
Hunt Hunt/UCD Group 1~24
Pickup Pickup Group 1~8
Music Music Channel 1, 2
Bell Loud Bell/E.P./M.S.
Mmcnf Meet Me Conf. 1~8
Vir Virtual Numbers 1-30
Spd Speed Dial – Individual
Speed Dial – System(common)
Feature Access Codes:
Agent Log Off
Alarm Clock
Alarm Key
All Forward
Attendant Administration
P7290 IMM
DX-80 I
NSTALLATION AND
PSWD :_
bksp show chg
FTR KEY RESET
go
DIR#/CODE LOOKUP
dir ftr suffix
dir
]. The first screen of directory number listings displays. If you
next
ftr
!
button be pressed preceding the code.)
suffix
]. The list of digits dialed after system resource directory numbers
next
] buttons to move through the display categories.
1 = 9
2~8 = 800~806
Tenant = 400
Group 1~8 = 401~408
= 777
= 410~433
= 440~447
= 771, 772
= 779
= 390~397
= 700~729
= 470~499
= 500~699
= [FEATURE] 91
= [FEATURE] 92
= [FEATURE] 62
= [FEATURE] 22
= [FEATURE] #0
3-128
M M 03/01
AINTENANCE ANUAL
All feature access codes
!/5
. The display shows"
] until the resource displays, then press that interactive
]. Features are listed abbreviated and alphabetically.
!/5
co gp
].