Hold - Exclusive - Comdial DX-80 Installation & Maintenance Manual

Conditions
The Hidden Code feature can only be used when stored on a Flexible Feature button.
Hold – Exclusive
When using the feature button and the hold button together, you may place an outside call on private/exclusive hold.
The held line will appear in use at other extensions.
Related Features
Hold Reminder
Hold - Common (System)
Related Programming
Call Handling - Ex_Hold Time, Hold Recall, Hold Reminder
Operation
While connected to a CO Line press
Conditions
a) When you place a CO line call on Exclusive Hold, the green lamp for that line at your telephone will flash
fast and the red lamp will light steady at other extensions for that CO line.
b) A CO line call will be placed on System Hold after the Exclusive Hold time expires. You will hear a tone
alerting you that the timer has expired and the hold condition for that CO line changes to System Hold. The
green lamp at your telephone will flash slowly and the red lamp at other extensions will begin to flash slowly.
c) Exclusive Hold is used only for CO line calls.
d) The Exclusive Hold duration is programmable from 1-8 minutes in the Database Programming.
Default Settings
Call Handling – Hold Reminder is set at "60" seconds.
(Range is: 0-90 seconds, "0" disables the reminder Function.)
Call Handling – Exclusive Hold Time is set at "3" minutes.
(Range is 0-8 minutes. "0" disables Exclusive Hold Recall.)
Programming Abstract
•
Program the Hold Reminder Time. (See Hold Reminder.)
•
Program the Exclusive Hold Time.
Programming via the DET (Digital Extension Terminal)
back next
Note: [ ], [ ], [
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
++++++++
"
show
•
Press [ ]. The DB Item Select screen displays.
•
Input 03-08, then press [
chg
•
Press [ ] until the appropriate Exclusive Hold Time displays.
•
Press to return to the previous menu level or press
screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
P7290 IMM
DX-80 I
NSTALLATION AND
!
and then press
show chg bksp
], [ ], [ ], and [
." (Note: This eight-character password can be changed.)
save
]. This advances to EX_HOLD TIME programming.
3-144
M M 03/01
AINTENANCE ANUAL
Hold - System
Call Handling - Hold Reminder
.
save
] are LCD interactive button operations. Use the
!+*
and then enter the DB Admin password
to return to the DB Item Selection
!