Call Back - Extension [Cbck] - Comdial DX-80 Installation & Maintenance Manual

Call Back – Extension
This feature allows you to queue an extension, which is busy, in Do Not Disturb (DND) or idle. When you send a Call
Back to a busy extension, the Call Back process will begin when the busy extension hangs up. When you send a
Call Back to an idle extension, the Call Back process will begin once the user performs an operation at that extension
and then hangs up.
When the Call Back process begins you will hear bursts of tone signaling you to pick up the handset or press the LCD
soft key under 'reply'. Then the queued extension begins ringing.
Related Features
Intercom Mode Selection
Direct Station Selection
Voice Announce Hands-free Reply
Related Programming
Call Handling – Tenant Calling
Operation
1. Dial the extension directory number of the busy extension.
If the extension you are calling is in Tone Ringing Mode, the display will show:
If the extension you are calling is busy, the display will show:
cbck
2. Press [ ]
Confirmation tone is heard and Display will read
Your extension will return to idle status.
To Answer a Call Back:
1. When the Call Back begins (called extension is now available), your extension will ring a special Call Back
alert ring for 30 seconds and the display will show:
2. Lift the handset or press
Or...
reply
3. Press [ ] to activate the Call Back.
To cancel all active Call Backs prior to receiving Call Back Alert ringing:
!,,
1. Press
Conditions
del
a) If you press [ ] during the Call Back Alert ringing, the Call Back will be cancelled and the display will
read.
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
EXT XXX
Cbck msg
EXT XXX BUSY
cbck msg next
CBCK TO EXT XXX
CALL BACK TO XXX
reply del
CBCK DELETE XXX
3-38
M 03/01
ANUAL
Forced Intercom Tone Ring
Interactive Soft Buttons
Delete all Call Back (F##)
[ ]
cbck