Default Set !69; Dial Pad Confirmation / Touch Tone; Direct Inward System Access (Disa) (Optional Aam Required) - Comdial DX-80 Installation & Maintenance Manual

Default Set
When an extension user has invoked several features on his or her extension, it may be necessary to clear all
settings and return the telephone set to the factory condition. The Default Set code is used to perform this operation.
Operation
!69
1. Press .
The display shows the following screen to confirm the intention:
go
2. Press [ ] to invoke the operation.
Confirmation tone is heard and the operation is complete.
Conditions
The following extension parameters are reset to the value shown:
LNR = empty
SNR = No Saved Number
Memo = No Saved Number
Telephone Lock = No
Auto Hold = No
Page Receive = Yes
Busy Ring = Yes
Hotline to = NULL (none)

Dial Pad Confirmation / Touch Tone

Dial Pad Confirmation is a tactile response tone that confirms Dial Pad button operations. Whenever a dial pad button
is pressed while this feature is enabled (default) a low-volume tone is emitted through the telephone speaker
indicating that this dial pad button has been pressed. This tactile response feature is either very desirable or disliked.
This feature code allows the function to be disabled if necessary.
Operation
1. While the telephone is idle, press.
Confirmation tone is heard and the display indicates the current status.
2. Momentarily the display returns to idle.
Direct Inward System Access (DISA) (
This feature allows you to remotely access system resources such as System Speed Dial, CO Line Access, and
Intercom dialing.
Any number of DISA lines may be assigned as incoming DISA access based on the system service mode (Day,
Evening).
DISA can be accessed via the Automated Attendant as well as by dedicated DISA lines.
Access to DX-80 system resources for out-calling is secured by means of verified passwords against the assigned
extension number. Use of system resources is accomplished only when a valid extension number has been entered
and when the password entered matches that stored for the extension number entered.
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
DEFAULT SET
go
!;1
.
TOUCH TONE ON
TOUCH TONE OFF
3-98
M 03/01
ANUAL
!69
!;1
Optional AAM required
)