Database Administration - Via Any Digital Extension - Comdial DX-80 Installation & Maintenance Manual

•
Dialing begins and then the modems negotiate connection. A successful negotiation results in the following
confirmation display:
•
The connection is also noted with an icon that appears in the upper left corner of the display: [Mdm].
•
Once a modem connection has been accomplished, F4-Connect is possible. F4-Connect is required to link
PC-DBA to the DX-80 system processor.
F10 – RS232C
•
F10-RS232C is the utility to setup the PC COM port. To successfully setup the PC COM port you must know
how the PC hardware is configured. In this utility you must select the COM Port number (1 or 2 supported)
and the baud rate that will be used for the connection. At default PC-DBA is setup to use COM Port 1 at
9600 bps. (9600 bps matches the default baud rate set for the DX-80 CPM – PC-DBA Port.)
•
While using a modem connection it is best to set the COM port baud rate at 2400 bps since this is the speed
of the DX-80 Optional Modem. (Setting this speed can expedite the modem negotiation process since
compression link choices will not be attempted.)
Database Administration – Via Any Digital Extension
The DX-80 system allows the user/installer to administer system database parameters via any DX-80 digital
telephone. It is possible to program the DX-80 system while the telephone is in use; however, certain button
operations are changed for the purposes of programming and cannot be used for telephone call processing.
Therefore, we don't suggest using these features simultaneously unless you have been directed to do so by the
servicing technician.
Default Settings
Database Administration Password is set at
combination of alphanumeric characters using the conventions of Extension/CO Line Name.)
Programming Abstract
•
Enter the Database Administration to change any programmable system setting.
•
Change the default password if necessary.
Enter the Database Administration mode at any Digital Extension:
•
Press the Feature button.
+*
•
Press . Then system then prompts for the system Database Administration password.
•
Input the password:
•
When the correct password is successfully input, Database Administration is entered.
LCD Interactive buttons:
The LCD Interactive buttons are essential to complete database programming tasks. These buttons take on
many functions while in the Database Administration mode. Throughout the programming instructions, the
P7290 IMM
DX-80 I
NSTALLATION AND
+----------------------------------------+
¦ MODEM Connect
+----------------------------------------¦
¦
¦ Waiting
+----------------------------------------+
+----------------------------------------+
¦ MODEM Connect
+----------------------------------------¦
¦
¦ Connect Succeed
+----------------------------------------+
++++++++
++++++++
, then press [
3-96
M M 03/01
AINTENANCE ANUAL
¦
¦
¦
¦
¦
¦
(eight "
show show
]. (" " is a LCD Interactive button.)
+
"). (Range is: any