Flash - Pbx Line - Comdial DX-80 Installation & Maintenance Manual

Flash – PBX Line
Flash – PBX Line is a programmed setting that will determine what flash timing will be presented to the host
telephone system when the DX-80 is installed as a subordinate system. This feature is critical to perform accurate
host-system functions like PBX call transfer. When used "behind" a PBX, the DX-80 system extensions should have
the Flash feature code programmed onto a Flexible Feature Button for easy access.
Related Features
Speed Dial (System and Station)
Last Number Redial
Related Programming
Call Handling – PBX Flash Time
Operation
While connected to a PBX Line, press
PBX circuit.
Conditions
a) The Flash code may be stored in any speed dial location.
b) The Flash code may be stored in the Last Number Redial buffer. When you activate redial, a Digital
Speakerphone display will show a "/" to indicate the Flash code.
c) The Flash time is programmable from 100ms to 1500ms in increments of 100ms (1/10th of a second).
d) At a Digital Speakerphone, when the flash code is dialed "PBX Flash" will be displayed temporarily.
e) Single line extensions must generate a hook-flash on the analog port then dial
flash on a PBX Line.
Default Settings
Call Handling – PBX Flash Time is set at "0.6." (Range is: 0.1-3.0 seconds.)
Programming Abstract
Program the required PBX Flash Time (applies to all CO Line of Type "PBX.")
Programming via the DET (Digital Extension Terminal)
back next
Note: [ ], [ ], [
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
++++++++
"
show
•
Press [ ]. The DB Item Select screen displays.
•
Input 03-03, then press [save]. This advances to PBX Flash programming.
•
Press to return to the previous menu level or press
screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing «.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu. Then press «.
•
Use ¢£¤¥ to highlight "Call Handling." Then press «.
P7290 IMM
DX-80 I
NSTALLATION AND
!3
. The programmed hook-flash is invoked on the connected
show chg bksp
], [ ], [ ], and [
." (Note: This eight-character password can be changed.)
3-133
M M 03/01
AINTENANCE ANUAL
Memo Pad
Automatic Redial
save
] are LCD interactive button operations. Use the
!+*
and then enter the DB Admin password
to return to the DB Item Selection
/3
to generate a hook-