Forced Intercom Call Forward; Forced Intercom Tone Ring - Comdial DX-80 Installation & Maintenance Manual

•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
•
Press ° (escape) again to return to the Database Programming menu.
•
Make other directory number changes in the same manner for each system resource directory number to be
changed.
•
Exit PC-DBA programming when finished.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

Forced Intercom Call Forward

Tone ringing intercom calls can be immediately forwarded to the attendant by pressing the DND button.
Related Features
Do Not Disturb
Call Forward
Operation
1. When your telephone is set to Tone Ring and another station is calling you: The telephone will display:
!4
2. Press . The display will show:
3. The ring is discontinued and the call is sent to the programmed attendant.
Your extension remains in Do Not Disturb until deactivated.
Conditions
a) The attendant assigned extension cannot invoke Forced Intercom Call Forward.
b) When Forced Intercom Call Forward is activated, the calling party connection is an intercom call to the
attendant extension.
c) You cannot activate Forced Intercom Call Forward if another Call Forward mode is already enabled.

Forced Intercom Tone Ring

In certain conditions a Voice Announce call may not be heard at the receiving extension. (Usually background noise
is high or the speaker volume setting has been minimized for a prior call.) Forced Intercom Tone Ringing allows the
intercom call initiator to cause the called telephone to ring. After a Voice Announce connection has been established
to an extension, you may change the alert signal at the called extension from Voice Announce to Tone Ring.
Related Features
Intercom Mode Selection
Operation
1. Establish an intercom call to an extension in Voice Announce mode (Hands-free or Private). Your telephone
will display:
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
STA xx CALLING
DO NOT DISTURB
VOICE CALL xx
msg
3-141
M 03/01
ANUAL
Intercom Mode Selection
Intercom - Non Blocking
!4
*