Extension Pick Up Groups - Comdial DX-80 Installation & Maintenance Manual

•
Use ¢£¤¥ to highlight User Password Length, then press «.
• Input the User Name Password Length (4-8), then press «.
Program Extension Password(s):
•
Use ¢£¤¥ to highlight the extension password to be changed and press
•
Input the new numeric password then press «
•
When all changes are made press the ° (escape) key to exit this database programming screen. You will
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
•
Press ° (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

Extension Pick Up Groups

The system provides eight (8) Extension Pick Up Groups per Tenant Group for partitioning the system into separate
departments for organized call answering within the department.
As an Extension of a Pick Up Group, you may retrieve calls ringing at another extension within the same pick up
group. Extension Pick Up Groups are assigned in the Database Programming.
Related Features
Call Pick Up
CO Line Ring Assignment
Related Programming
Extension - Pick Up Group
System Application - EXT Pickup Group
Operation
Refer to Call Pick Up.
Conditions
a) Extensions may be assigned to only one Extension Pick Up Group.
b) Pick Up priority is CO line calls then intercom calls. CO line call priority is Camped-On, Recalling,
Transferred, then incoming. Intercom call priority is Ringing then Voice Call.
Default Settings
Extension – Category 1 – Pick Up Group is set to "1." (Range is: 0-8.)
Programming Abstract
Program the Extension(s) for the Pick Up Groups.
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
.
3-115
M 03/01
ANUAL
enter
.
CO Line Receive Assignment
Transfer