Busy Ring - Allow/Deny !,2 - Comdial DX-80 Installation & Maintenance Manual

save
•
Press [ ].
•
Press twice to exit programming and return to idle condition.
Operation
1. Press the button programmed for the extension to be called.
2. Lift the handset to talk privately.
3. Hang up when the conversation is completed.
Conditions
a) BLF/DSS buttons may be assigned to any of the 30 User Programmable Feature Keys.
b) Extensions in Do Not Disturb mode will cause the LED associated to that extension to flash red.
c) Extensions that are busy will cause the LED associated to that extension to light steady red.
d) The DSS function can be used to transfer calls to other extensions.
e) Each Digital Speakerphone has a default feature button mapping, refer to the Description and Installation
sections for additional default mapping information.
Default Setting
All extensions are programmed for BLF/DSS buttons for extensions 101~112.
Programming Abstract
Refer to Flexible Feature Button Programming.
Busy Ring – Allow/Deny
This feature allows the extension user the ability to turn on or off muted ringing of incoming or transferred calls when
the user is in a busy status. When a CO line is ringing or transferred to a busy extension and Busy Ring is allowed,
the user will hear muted ringing. When a CO line is ringing or transferred to a busy extension and Busy Ring is
denied, the user will hear a single burst of warning tone. All programmed call forwarding and recall conditions apply in
either Busy Ring condition.
Related Features
Transfer
Related Programming
CO Line - Call Abandon, Route, and Answering Position
Call Handling - XFER_B Recall
Operation – Setup
To deny Busy Ring:
! ,2
Press ,
Confirmation tone will be heard, and the display will read:
To allow Busy Ring:
,2
Press [Feature],
Confirmation tone will be heard and the display will read:
Conditions
This feature may be programmed (F#3) under a flexible button on the Digital Speakerphone. No LED's will
be in use and the button can be depressed and toggled to allow/deny this feature.
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
BUSY RING DENY
BUSY RING ALLOW
3-33
M 03/01
ANUAL
Transfer Beep Enable (F56)
!,2