Private Line - Comdial DX-80 Installation & Maintenance Manual

Programming via the DET (Digital Extension Terminal)
back next
Note: [ ], [ ], [
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
++++++++
"
show
•
Press [ ]. The DB Item Select screen displays.
•
Input 02-740~755-12, then press [
Line selected.
chg
•
Press [ ] until the appropriate setting displays.
•
Press to return to the previous menu level or press
screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing «.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press «.
• Use ¢£¤¥ to highlight "CO Line" and then press «.
•
Use ¢£¤¥ to highlight "Category 2" and then press «.
•
Use ¢£¤¥ to highlight "Privacy Release" for the CO Line to be changed.
•
Press « until the appropriate setting displays.
•
Continue making other programming changes as required.
• When all changes are made press the ° (escape) key to exit this database-programming screen. You will
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
• Press ° (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

Private Line

The Private Line assignment provides a quick and secure method of programming one or more CO Lines for access
by only one extension. If the associated Private CO Line appears (on a feature button) at other extensions, the button
will light when busy but the line cannot be accessed from Hold, answered on incoming calls, or used for outgoing
access. The Private Line is used exclusively by the extension that is assigned the "Private To" extension in Database
Programming.
P7290 IMM
DX-80 I
NSTALLATION AND
show chg bksp
], [ ], [ ], and [
." (Note: This eight-character password can be changed.)
save
]. This advances to the Privacy Release programming for the CO
3-188
M M 03/01
AINTENANCE ANUAL
save
] are LCD interactive button operations. Use the
!+*
and then enter the DB Admin password
to return to the DB Item Selection