Intercom Calling - Non Blocking; Intercom Button; Intercom Mode Selection - Comdial DX-80 Installation & Maintenance Manual

Intercom Calling - Non Blocking

You can place an intercom call by dialing the intercom number associated to the extension you wish to call. If a
Direct Station Selection/Busy Lamp Field (DSS/BLF) button is programmed, it can be used to place an ICM call.
Intercom calls can be placed hands-free without lifting the handset. (Consideration must be taken for noisy
environments that may be unsuitable for hands-free connections.)
Each extension can determine how you receive intercom calls. Either: Voice Announce Hands-free mode, Voice
Announce Privacy mode, or Tone Ringing mode. (See intercom Mode Selection.)
Related Features

Intercom Mode Selection

Auto Line Select
Forced Intercom Tone Ring
Forced Intercom Call Forward
Flexible Button Programming
Operation
1. If Hot Key is disabled, you must first press the Intercom Button,
intercom dial tone.
2. Dial the extension number (101 to 156).
Or...
Press the DSS button for the extension that you wish to call.
3. Hang-up to end the call.
Conditions
a) Some applications may require a button to indicate use of the intercom feature at extensions. To meet this
requirement, the feature code
use.
b) Intercom calls to telephones in Voice Announce – Hands-free or Voice Announce - Private are "logically"
answered by the system at the called extension. Therefore these calls cannot be picked up by other
extensions using Group Call Pickup.
c) Auto Line Selection is set to "ICM" (Intercom) at default. So, intercom dial tone is heard automatically upon
lifting the handset or when pressing the
d) When you call an extension that is in Voice Announce mode you can change the mode to Tone Ringing by
*
after the extension number (Forced Tone Ringing).
e) If a called extension does not answer you can invoke a callback to that extension by first using Forced Tone
Ring.
Intercom Mode Selection
A Digital speakerphone has the benefit of receiving intercom calls in three ways:
•
Voice Announce Hands-free reply mode.
•
Voice Announce Privacy mode
•
Tone Ringing mode.
The chosen mode is set at all digital speakerphones for their own unique mode of operation.
Related Features
Call Forward
P7290 IMM
DX-80 I M
NSTALLATION AND

- Intercom Button

VOICE EXT XXX
msg
!65
can be programmed on an available Flexible Feature Button for
button.
Flexible Feature Button Programming
3-156
M 03/01
AINTENANCE ANUAL
Auxiliary Lamp
Intercom Mode Selection
Intercom - Non Blocking
Flexible Feature Button Programming
button or lift the handset to get
!65
!98