Extension Swapping - Comdial DX-80 Installation & Maintenance Manual

save
•
Press [ ]. This advances to the
•
Input a Pickup Group directory number associated to the extensions where this data is to be copied, then
save
press [ ].
COPY TO
•
The screen is immediately prompted again and the data may be copied again to another group
of extensions via another Pickup Group directory number. Repeat the process for all extension Pickup
Groups to be copied with this data.
•
Press button to exit Individual Copy programming and return to the previous menu level.
•
Continue making other programming changes
Or...
•
Press to return to the previous menu level or press
screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing «.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press «.
•
Use ¢£¤¥ to highlight "System Application." Then press «.
•
Use ¢£¤¥ to highlight "Extension Copy." Then press «.
•
Select the appropriate copy technique:
"Individual" to copy programming from one extension to other extensions, one extension at a time.
"Group" to copy programming from one extension to a group of extensions, one group at a time.
•
Press «. The cursor is positioned on the Source database item.
•
Input the Source extension directory number.
•
Press «. The cursor advances to the next database item input area "Destination DIR No."
•
Input the directory number of the Extension (if Individual) or Extension Pickup Group (if Group) for which the
source extension data is to be copied.
•
Press «. (Note: The copy is performed at this time. There is no "are you sure" prompt given.) When the
copy function is completed the cursor is positioned to accept another directory number for which to copy the
data again. Continue entering destination directory numbers,
Or...
•
Press the ESC (escape) key. At this time you may enter a new source extension directory number and
complete the process for another extension or group of extensions.
•
To exit this database-programming screen, press the ESC (escape) key again. You will see the prompt:
"Exit This Feature"; press "Y" for yes.
•
Continue making other programming changes or exit PC-DBA programming.
Note: changes made via PC-DBA are NOT updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming Guide section of this manual to learn more about
this procedure.

Extension Swapping

As part of the Flexible Numbering Plan in the DX-80 system, extension directory numbers (as defined in the database
programming) can be exchanged (swapped) from one port to another. This feature can be used to simplify moves
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
COPY TO
screen.
3-118
M 03/01
ANUAL
to return to the DB Item Selection