•
Enter Database Administration using the feature code
++++++++
"
show
•
Press [
]. The DB Item Select screen displays.
•
Input 02-740~755-11 (740~755 = the CO Line directory number).
chg
•
Press [
] until the appropriate Ring Type displays.
•
Continue making other programming changes or exit the programming mode.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing «.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press «.
•
Use ¢£¤¥ to highlight "CO Line." Then press «.
•
Use ¢£¤¥ to highlight "Category 2." Then press «.
•
Use ¢£¤¥ to highlight the Ring Type for the CO Line.
•
Press « until the appropriate Ring Type displays.
•
Use ¢£¤¥ to highlight the next CO Line Ring Type to be changed.
•
Repeat the programming process for all CO Lines.
•
When all changes are made press the ° (escape) key to exit this database programming screen. You will
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
•
Press ° (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
CO Line Ringing Modes
The DX-80 system has several ringing modes to allow flexible ringing patterns depending office conditions. The
ringing modes available are: DAY, EVEning, ALTernate, and TIME. The DAY and EVE modes can be programmed
for ringing assignments as required in these two operational conditions. Details for each mode are listed below.
DAY:
This is the ringing pattern for CO Line ringing assignments while the system is in DAY mode.
EVE:
This is the ringing pattern for CO Line ringing assignments while the system is in EVE (evening) mode.
TIME:
This is a scheduled time clock that automatically adjusts the mode of system operation from DAY mode to
EVE mode based upon preprogrammed settings.
ALT:
The Alternate mode is specific to use with the optional AAM (Automated Attendant Module). This mode re-
directs callers who have dialed 0 (zero) at the auto-attendant prompt to a temporary (alternate) destination.
This is typically used for primary attendant break periods etc.
P7290 IMM
DX-80 I
M
NSTALLATION AND
AINTENANCE
." (Note: This eight-character password can be changed.)
3-76
M
03/01
ANUAL
!+*
and then enter the DB Admin password
!63