Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing «.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press «.
•
Use ¢£¤¥ to highlight "Call Handling" and then press «.
•
Use ¢£¤¥ to highlight "Category 2" and then press «.
•
Use ¢£¤¥ to highlight the database item "SLT Hook Flash – Start or End" as required.
•
Press « until the appropriate value displays.
•
Continue making other programming changes as required.
•
When all changes are made press the ° (escape) key to exit this database-programming screen. You will
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
•
Press ° (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Single Line Telephone – CO Line Flash
Reference the feature: Flash – CO Line. When a Single Line Telephone must generate a Flash command to the
connected CO Line (typically applicable to PBX circuits and Centrex
command must be used.
Related Features
Single Line Telephone – Flash
Related Programming
Call Handling - CO Flash Time (Reference Flash – CO Line)
Operation – sending a Flash to a connected CO Line from a SLT
1.
While connected on a CO Line and conversation, operate the single-line telephone hook-switch flash.
/3
2.
Dial the code
3.
Dial whatever code is required to complete the hook-flash initiated PBX/Centrex
Conditions
The successful operation of the connected device features (PBX/Centrex
operation of that product's features. Refer to the information provided with the connected equipment for
more information.
P7290 IMM
DX-80 I
NSTALLATION AND
. The DX-80 sends the hook-switch flash command to the connected CO Line.
3-200
M
M
03/01
AINTENANCE
ANUAL
®
features of CO Lines) the SLT – CO Line Flash
Flash – CO Line
®
) is dependant upon proper
/3
®
feature.