Automatic Selection (Co/Intercom) !62 - Comdial DX-80 Installation & Maintenance Manual

•
Press any key at the program title page to enter the Main Menu.
•
Select PC-DBA from the Main Menu. The PC-DBA menu is then shown.
•
Select Programming from the PC-DBA menu.
•
Use ¢£¤¥ to highlight "Call Handling." Then press «.
•
Use ¢£¤¥ to highlight "Category 2." Then press «.
•
Use ¢£¤¥ to highlight one of the three Automatic Redial data items and press «.
•
"Attempts" requires input from the keyboard. Once you press
value from 0-99. (Note: "0" disables Auto Redial.) After the data has been input, « must be pressed
again to store the new data move on to the next database item.
•
"Interval" can be set to one of the available choices, which are selected in sequence with each press of
the « key.
•
"Waiting Time" can be set to one of the available choices, which are selected in sequence with each
press of the « key.
•
Continue programming other database items as required.
• When all changes are made press ° (escape) to exit System Reminder programming. You will be prompted
to confirm exit request; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave System Reminder unchanged.
•
Press "Y" to save changes.
•
You will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave System Reminder unchanged.
•
Press "Y" to save changes.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Automatic Selection (CO/Intercom)
This feature allows you to access a specific outside line or intercom (ICM) automatically when you lift the handset or
press the On/Off speakerphone button on a Digital Extension.
A line will not be accessed automatically when your telephone is receiving an incoming call (outside or intercom) or a
line is recalling at your telephone. However, you may override this incoming call priority operation by pre-selecting an
outgoing line before lifting the handset.
Related Features
Private Line
Ringing Line Priority
Related Programming
Extension - Line Assignment
CO Line - Tenant Group, CO Line Group
System Application - Numbering Plan 1 - CO Group, Numbering Plan 4 - CO Line Directory No.
Operation
icm co co gp
Note: [ ], [ ], [
operations. Use the three buttons below the LCD display to actuate the associated operation.
Setup
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
back next show
], [ ], [ ], [ ], [
3-29
M 03/01
ANUAL
Enter , you must input the appropriate
CO Line Group
chg bksp save
], [ ], and [ ] are interactive LCD button
!62