Monitor - Extension/Co Line - Comdial DX-80 Installation & Maintenance Manual

•
Use ¢£¤¥ to highlight "Modem & Serial Port" and then press «.
• Use ¢£¤¥ to highlight the database item "Built-in Modem – DIR. No." if the number is to be changed.
•
Press «
.
•
Input the new directory number and then press
•
Use ¢£¤¥ to highlight the database item "Built-in Modem – Baud Rate" to change the operating speed
of the modem.
•
Press «. Each time that enter is pressed the value of this database item is updated.
•
Continue making other programming changes as required.
• When all changes are made press the ° (escape) key to exit this database-programming screen. You will
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
Press "N" to abort changes and leave all data unchanged.
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
Press "N" to abort changes and leave all data unchanged.
Press "Y" (yes) to continue with the save operation.
•
Press ° (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Monitor – Extension/CO Line
The DX-80 system allows users to monitor conversations at other extensions for the purposes of service observance.
Monitoring of busy Extensions and CO Lines is possible only at extensions with a Monitor Class Of Service that has
priority over the Monitor Class Of Service of the extension to be monitored.
Since this feature is very similar to Intrusion, it is possible to "shift" between these two features when Monitor has
been invoked.
This feature may violate privacy laws if used in a manner that is inconsistent with requirements of these
laws. Manufacturer assumes no responsibility with regard to the use of this feature. It is provided for the
virtue of ethical use only. YOU are responsible for using this feature appropriately considering all applicable
Related Features
Intrusion
Related Programming
Extension – Monitor Class
Operation
1. Place a call to a busy extension or press a busy CO Line button.
monit
2. Press [ ]. The audio connection at the busy CO Line is connected to your extension. Also at this time,
the MUTE function at your telephone is automatically activated, making the monitor condition as un-intrusive
as possible. The display indicates the internal extension that is being monitored.
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
enter
LEGAL NOTICE:
laws.)
CO LN BUSY 742
cbck monit
3-172
M 03/01
ANUAL
to temporarily store this data.