Tandem Attendant; Tone Or Voice Signaling - Comdial DSU II System Manual

IMI66–132
3.4.12

Tandem Attendant

Description: When you enable this feature, a recall from an unanswered call transfer or timed hold
recall will ring at both attendant stations. When you disable it, only the attendant station
that transferred the call will ring.
To Program: 1. Dial 24.
2. Press A1 to toggle between enable and disable (LED On = Enable)
3. Dial
To change setting, repeat procedure and make different selection.
3.4.13

Tone or Voice Signaling

Description: Intercom calls can be tone signaled or voice signaled. Use this programming feature to
select the system's signaling choice. With either method set as the system's first choice,
the user can choose the other method as needed.
To Program: 1. Dial 16.
2. Press A1 to toggle between Voice To Tone (LED On = voice signaling)
3. Dial
To change setting, repeat procedure and make different selection.
3 – 28 Programming The DSU II System
—OR—
dial 1 to Enable (A1 LED is on)
dial 2 to Disable.
for configuration mode.
—OR—
dial 1 for Voice First
dial 2 for Tone First.
for configuration mode.
DSU II Digital Telephone System
"TANDEM ATTN XXX "
"TANDEM ATTN ON"
"TANDEM ATTN OFF "
"XXXXX ANN. FIRST"
"VOICE ANN. FIRST"
"TONE ANN. FIRST"