Co Line Signaling / Dialing Type (Tone/Pulse) - Comdial DX-80 Installation & Maintenance Manual

CO Line Signaling / Dialing Type (Tone/Pulse)

CO Lines may be designated as Pulse Dial or DTMF (Touch Tone®) Dial types. This setting will determine how
telephone number dialing is delivered to the telephone company.
Related Features
Pulse to DTMF Conversion
Operation
Dialing is delivered according the programming of each CO line while a user dials the telephone number.
Conditions
A CO Line that is marked as Dialing Type "Pulse" can be temporarily forced to Tone mode for use with
automated answering devices etc. using the Pulse to DTMF Conversion feature *.
Default Settings
All CO Lines are assigned to signal in DTMF (Tone) mode.
Programming Abstract
Program CO Lines for Pulse dialing or Tone (DTMF) dialing as required.
Programming via the DET (Digital Extension Terminal)
back next
Note: [ ], [ ], [
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
++++++++
"
show
•
Press [ ]. The DB Item Select screen displays.
•
Input 02-ccc-07 (where "ccc" = the CO Line directory number to be programmed).
chg
•
Press [ ] to select Tone or Pulse dialing mode.
•
Press (up or down) to return to the DB Item Select screen to input a new CO Line number.
•
Continue making other programming changes or exit the programming mode.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing «.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press «.
• Use ¢£¤¥ to highlight "CO Line." Then press «.
•
Use ¢£¤¥ to highlight "Category 1." Then press «.
• Use ¢£¤¥ & ³´ to select CO Lines 1-8 or 9-16.
•
Use ¢£¤¥ to highlight the appropriate CO Line - Dialing mode.
•
Press « until the appropriate value displays.
• Use ¢£¤¥ to highlight the next CO Line Dialing mode to change.
•
Repeat the programming process for all CO Lines.
• When all changes are made press the ° (escape) key to exit this database programming screen. You will
see the prompt: "Exit This Feature"; press "Y" for yes.
P7290 IMM
DX-80 I
NSTALLATION AND
show chg bksp
], [ ], [ ], and [
." (Note: This eight-character password can be changed.)
3-79
M M 03/01
AINTENANCE ANUAL
save
] are LCD interactive button operations. Use the
!+*
and then enter the DB Admin password