Co Line Group - Comdial DX-80 Installation & Maintenance Manual

•
When all changes are made press the ° (escape) key to exit this database programming screen. You will
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
•
Press ° (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

CO Line Group

The system provides eight (8) CO Line Groups for assignment of specific CO lines. The CO Line Group assignment
is used for CO Line Pool access.
The CO Line Groups are (default) designated by three-digit notation when programmed on Digital extension
programmable feature buttons, with the exception of CO Line Group 1, which is default designated a one-digit "9." CO
Line Groups 2 through 8 are programmed by dialing 800 through 806.
Related Features
CO Line Alternate Route
Related Programming
None
Default Settings
CO Line – CO Group = 1 for all CO Lines. (Range is 1-8.)
System Application – CO Group – Length 1 = 1 (Range is 1-4.)
System Application – CO Group – Leading 1 = 9
(Range is any available, non-conflicting Directory Number.)
System Application – CO Group – Length 2 = 3 (Range is 1-4.)
System Application – CO Group – Leading 2 = 80 (yields 800-806)
(Range is any available, non-conflicting Directory Number.)
System Application – CO Group – Length 3~5 = 3 (Range is 1-4.)
System Application – CO Group – Leading 3~5 = NULL
(Range is any available, non-conflicting Directory Number.)
Programming Abstract
•
Program the Lines into the CO Line Groups.
•
Reference Flexible Numbering Plan for programming of Directory Numbers for CO Line Groups.
Programming via the DET (Digital Extension Terminal)
back next
Note: [ ], [ ], [
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
++++++++
"
show
•
Press [ ]. The DB Item Select screen displays.
P7290 IMM
DX-80 I
NSTALLATION AND
show chg bksp
], [ ], [ ], and [
." (Note: This eight-character password can be changed.)
3-63
M M 03/01
AINTENANCE ANUAL
Private Line
save
] are LCD interactive button operations. Use the
!+*
and then enter the DB Admin password