Headset Jack; Headset Mode - Comdial DX-80 Installation & Maintenance Manual

*
2. Press to change the alert signal at the called extension from Voice Announce to Tone Ringing. Your
telephone will display:
3. A Tone Ringing alert signal is sent and continues at the called extension until answered.
4. If your call remains unanswered, you may dial
Conditions
a) It is not possible to force an extension from Tone Ring mode to Voice Announce mode if Tone Ring is the
mode they have selected.
b) If you want to leave a Callback request at a called extension that doesn't answer, the alert signal must be
set for Tone Ringing.

Headset Jack

All Digital Speakerphones have a standard 2.5 millimeter headset jack. This headset jack facilitates industry-standard
headset equipped with this jack type. Headset jack adapters are often available from headset manufacturers to adapt
your headset to the 2.5 mm jack.
A headset connected to the headset jack can be operated as an integral component of the DX-80 digital
speakerphone. Refer to Headset Mode for operation.
Related Features

Headset Mode

Headset Mode
All Digital Speakerphones have a standard 2.5 millimeter headset jack. When Headset Mode is selected (either by
pressing a preprogrammed headset feature key or dialing the Headset Mode code), the
activate/deactivate the headset.
While in Headset Mode, when the
the headset active. When the
call in progress.)
Related Features
Flexible Feature Button Programming
Operation – Activate Headset Mode
While the telephone is idle, press
Headset Mode code. The display indicates the new status:
Operation – Deactivate Headset Mode
While the telephone is idle, press
Headset Mode code. The display indicates the new status:
Operation – Use the headset to place a call
1. While the telephone is idle, press
indicate that the headset is active.
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
CALLING STA 10
cbck msg
*
again to return to Voice Call Announce mode.
button is pressed, the extension status changes to an off-hook condition with
button is pressed again, the extension status returns to idle (disconnecting any
!9/
or press the Flexible Feature button programmed with the
HEADSET ENABLED
!9/
or press the Flexible Feature button programmed with the
HEADSET DISABLED
, a DSS button or CO Line button. The
3-142
M 03/01
ANUAL
!9/
button is used to
button LED flashes to