Hidden Codes !61 - Comdial DX-80 Installation & Maintenance Manual

2. Intercom Dial Tone, CO Line dial tone or Intercom ring-back tone is heard depending on the function
invoked.
3. Press again to disconnect the current call.
Operation – Use the headset to answer a call
1. While the telephone is ringing, press
active.
2. The ringing call is answered and connected to the headset.
3. Press again to disconnect the current call.
Conditions
a) You may assign a feature button with the Headset feature code and use the button to turn the headset on
and off. When the headset is enabled that button will light.
b) While using the headset, you may pick up Intercom Voice calls by pressing
c) Incoming CO line calls may be answered by pressing
pressing the specific CO line button.
d) Other features like background music and muted ring continue to operate in the same manner while you are
on-hook.
e) Non-amplified headsets may be powered directly from the key telephone. In most cases this interface
permits the key telephone to control the Volume Up/Down and Mute features. Some headsets may require
the use of the headset adapter keys to adjust the volume, mute and other headset functions.
f) Pressing will disconnect calls when the Headset mode is active.
Hidden Codes
A four-digit code may be stored for dialing by one-button operation. The Hidden Code feature is reserved to use with
a Flexible Feature button. (It must be stored on a Flexible Feature button to operate.) This feature is typically used
with voice mail systems (both internal and external). When the voice mail mailbox is reached, the Hidden Code button
can be pressed to dial the stored code.
Related Features
Integrated Voice Mail
Operation – Storing the code
1. While the telephone is idle, access Flexible Feature Button Programming (
button to be stored with your Hidden Code.
chg
2. Press [ ].
feat
3. Press [ ].
!61
4. Press + {the four-digit code to store}.
save
5. Press [ ].
6. Exit Flexible Feature Button Programming.
Operation – Using the Hidden Code
1. Access the voice mail system (either the DX-80 Voice or an external voice mail system).
2. When you hear the prompt to enter your password, press the Hidden Code button.
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
. The
AVAILABLE KEY
chg
SELECT FUNCTION
dir feat
FTR CODE:_
bksp save chg
3-143
M 03/01
ANUAL
button LED flashes to indicate that the headset is
.
(for automatic priority ring selection) or by
Flexible Feature Button Programming
!/3
!61
) then press the feature