Caller Id To Analog Ports (Standard) - Comdial DX-80 Installation & Maintenance Manual

Camped - On CO Line Calls
Recalling CO Line Calls
Transferred CO Line Calls
Incoming CO Line Calls
Tone Ringing Intercom Calls
Related Features
Call Park
Transfer
Related Programming
System Application - Extension DIR Number, CO Line DIR Number, Virtual Number
System Application - Extension Pickup Group, Extension Hunt Groups
Extension - Tenant Group, Pickup Group,
Operation
When you hear another extension in your pickup group ringing, press
Or...
When you hear an extension in another pickup group ringing, dial that Pick Up Group number (440-447).
Conditions
a) If the call at the dialed extension has stopped ringing, you will hear error tone and the display on a Digital
Speakerphone will show "PICKUP FAILURE."
b) A extension that doesn't have the outside line appearing on a button or doesn't have CO Line Receive
programmed may still answer the ringing line by the Call Pick Up procedure.
c) The Call Pick Up feature code may be programmed on any programmable feature button.
d) If several calls of the same priority are ringing at the extension, the calls are answered in the order they are
received.
Default Settings
System Application – Numbering Plan – Ext. Pickup Group – Length is set to 3.
(Range is 1-4.)
System Application – Numbering Plan – Ext. Pickup Group – Leading 1 is set to 44. (Range is any available,
non-conflicting directory number.)
System Application – Numbering Plan – Ext. Pickup Group – Leading 2 & 3 are set to Null (none). (Range is
any available, non-conflicting directory number.)
Programming Abstract
•
Program the Ext, Pickup Group Length if the necessary code is not three digits long.
•
Program the Ext. Pickup Group Leading Digits (1,2,3) if the necessary code is not 440-446.
•
Refer to Flexible Numbering Plan for programming instructions.

Caller ID to Analog Ports (Standard)

The Caller ID feature requires Incoming Caller Identification as facilitated by the local telephone company. This
telephone company feature requires a subscription to the telephone company service to operate.
When Caller ID data is received on CO Lines connected to the DX-80 system this caller ID data is re-broadcast to
analog devices connected to analog ports of the DX-80 system. This means that standard analog telephones that
support the telephone company enabled Caller ID will function for this purpose even when connected "behind" the
DX-80 system as a system extension.
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
3-50
M 03/01
ANUAL
Intercom Tone Ringing
Tenant Group
*
.