Hold Reminder - Comdial DX-80 Installation & Maintenance Manual

•
Press ° (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

Hold Reminder

The system provides a programmable timer to remind you that a call has been left on System or Exclusive Hold.
When enabled, you will hear one ring tone repeated each time the selected hold time expires.
Related Features
Hold (System/Exclusive)
Related Programming
Call Handling – Hold Reminder
Conditions
a) Hold Reminder applies to both intercom and CO line calls.
b) Hold Reminder applies to CO line calls that are on System Hold or Exclusive Hold.
Default Settings
Call Handling – Hold Reminder is set at "60" seconds.
(Range is: 0-90 seconds, "0" disables the reminder Function.)
Programming Abstract
Program the Hold Reminder Time.
Programming via the DET (Digital Extension Terminal)
back next
Note: [ ], [ ], [
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
++++++++
"
show
•
Press [ ]. The DB Item Select screen displays.
•
Input 03-07, then press [
•
Press [chg] until the appropriate Hold Reminder Time displays.
•
Press to return to the previous menu level or press
screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing «.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press «.
•
Use ¢£¤¥ to highlight "Call Handling." Then press «.
•
Use ¢£¤¥ to highlight "Category 1." Then press «.
•
Use ¢£¤¥ to highlight the database item "Hold Reminder" to change the interval of this tone reminder.
P7290 IMM
DX-80 I
NSTALLATION AND
show chg bksp
], [ ], [ ], and [
." (Note: This eight-character password can be changed.)
save
]. This advances to Hold Reminder programming.
3-149
M M 03/01
AINTENANCE ANUAL
save
] are LCD interactive button operations. Use the
!+*
and then enter the DB Admin password
to return to the DB Item Selection