Last Number Redial !8 - Comdial DX-80 Installation & Maintenance Manual

Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing «.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu.
• Use ¢£¤¥ to highlight "Extension" and then press «.
•
Use ¢£¤¥ to highlight "Intrusion Active" for the Extension to be changed.
•
Press « until the appropriate value displays.
•
Use ¢£¤¥ to highlight "Intrusion Accept" for the Extension to be changed.
• Press «
.
Each time that enter is pressed the value of this database item is updated.
•
Use ¢£¤¥ to "Intrusion Tone" for the Extension to be changed.
•
Press « until the appropriate value displays
• When all changes are made press the ° (escape) key to exit this database programming screen. You will
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
• Press ° (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Last Number Redial
The Last Number Redial (LNR) feature automatically dials the last number dialed from your telephone. The LNR
retains sixteen (16) digits for each extension.
Related Features
Automatic Busy Redial
Related Programming
Call Handling - Dial Wait Time, Dial Delay Time, Dial Tone Detect
Operation
1. You may either choose a specific CO line for use with LNR by first pressing that CO line button or you may
allow the line to be selected automatically by the LNR feature.
2. Allow the system to select a CO Line and automatically dial:
!8
Press . The previously dialed number is dialed on the CO Line selected by the system.
3. Choose a CO Line first:
Press the appropriate CO Line button.
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
.
Memo Pad
3-160
M 03/01
ANUAL
!8