Busy Ring - Allow/Deny !,2 - Comdial DX-80 Installation & Maintenance Manual

Related Features
Direct Station Selection Console
Flexible Feature Button Programming
Related Programming
PC-DBA – Feature Key Programming – Extension Feature Keys
PC-DBA – Feature Key Programming – DSS Console Feature Keys
System Application - Feature Key Copy
Setup
chg bksp save
Note: [ ], [ ], [
buttons below the LCD display to actuate the associated operation.
!,3
•
Press
•
Press the feature button that is to be programmed. The current function displays.
chg
•
Press [ ] to change the function.
dir
•
Select [ ] via the LCD interactive button.
•
Input the directory number of the extension that is to be programmed on this feature button.
save
•
Press [ ].
• the On/Off button
Press
Operation
1. Press the button programmed for the extension to be called.
2. Lift the handset to talk privately.
3. Hang up when the conversation is completed.
Conditions
a) BLF/DSS buttons may be assigned to any of the 30 User Programmable Feature Keys.
b) Extensions in Do Not Disturb mode will cause the LED associated to that extension to flash red.
c) Extensions that are busy will cause the LED associated to that extension to light steady red.
d) The DSS function can be used to transfer calls to other extensions.
e) Each Digital Speakerphone has a default feature button mapping, refer to the Description and Installation
sections for additional default mapping information.
Default Setting
All extensions are programmed for BLF/DSS buttons for extensions 101~112.
Programming Abstract
Refer to Flexible Feature Button Programming.
Busy Ring – Allow/Deny
This feature allows the extension user the ability to turn on or off muted ringing of incoming or transferred calls when
the user is in a busy status. When a CO line is ringing or transferred to a busy extension and Busy Ring is allowed,
the user will hear muted ringing. When a CO line is ringing or transferred to a busy extension and Busy Ring is
denied, the user will hear a single burst of warning tone. All programmed call forwarding and recall conditions apply in
either Busy Ring condition.
Related Features
Transfer
P7290 IMM
DX-80 I
NSTALLATION AND
next dir
], [ ], and [ ] are interactive LCD button operations. Use the three
.
twice to exit programming and return to idle condition.
M M
AINTENANCE ANUAL
Do Not Disturb
Transfer and Answer Call
3-35
!,2