Call Forward On Busy/Ring-No Answer - Comdial DSU II System Manual

IMI66–132
3.7.6 Call Forward On Busy/Ring–No Answer
The system can automatically forward busy and/or ring-no answer (RNA) calls to a new station. The
system sends these calls to any idle station associated either by intercom hunt group or by department
with the called station. Use this feature to arrange for calls to cycle rapidly through such associated
stations by testing each one in turn with several rings.
Call Forwarding Of RNA Calls
Description: Enable call forward of RNA calls for individual stations using this programming feature.
NOTE:
To Program: 1. Dial 53.
2. Dial 21.
3. Dial 0–9 for 0–9 rings before forwarding.
4. Select station ports (LED On = Feature Assigned)
5. Dial
To remove call forwarding from a station, assign 0 rings.
Call Forwarding Of Busy Calls
Description: Enable call forward of busy calls for individual stations using this programming feature.
To Program: 1. Dial 53.
2. Dial 41.
3. Select station ports (LED On = Feature Assigned)
4. Dial
3 – 52 Programming The DSU II System
If you enable this feature, also program the system intercom signaling as
tone for the first choice.
—Station 10–57: Dial 10–57 or press C10–C57.
for for additional station ring assignments,
—OR—
dial for next station feature,
—OR—
dial for configuration mode.
—Station 10–57: Dial 10–57 or press C10–C57.
for next station feature
—OR—
dial for configuration mode.
DSU II Digital Telephone System
"STATION FEATURES"
"CALL FWD RNA "
"RING S= X"
"STATION FEATURES"
"CALL FWD BUSY"