Specify The Volume Area; Deleting The Media Area; Specifying The Label For Cleaning Cartridge; Notes On Label Affixing - Fujitsu ETERNUS LT160 User Manual

Cartridge Media and Bar Code Label Specifications

7.4.1.1 Specify the volume area

Any 6-digit string excluding "CLNOOO" and "DG(space)OOO" (OOO are arbitrary) can
be specified as the string for the volume area.
for the volume area.
Upper-case alphabetic character
Numeric character

7.4.1.2 Deleting the media area

The media area is fixed at "L1."

7.4.1.3 Specifying the label for cleaning cartridge

Specify the serial number of the label for cleaning cartridge as "CLNIOOL1" (OO are
arbitrary).
7.4.2

Notes on label affixing

-
-
-
Write protect switch
7-6
Table 7.4 Usable characters
Character type
Keep the label affixing surface clean and do not leave fingerprints and finger marks
on it.
Affix the bar code label on the specified location (concavity beside the write protect
switch) of the tape cartridge correctly (See
incorrect location or such that is orientation is incorrect, the bar code may become
unidentifiable. After affixing the bar code label, press on it firmly. Notice that the
end parts of the label are easily broken.
To replace the label, peel the old label from the tape and then affix a new one.
Figure 7.3 Bar code label affixing location
Table 7.4 lists characters that can be used
Description
26 characters ranging from A to Z
10 characters ranging from 0 to 9
Figure 7.3). If the label is affixed at an
Label affixing
location
C144-E072-01EN