Table of Contents
Advertisement
Active/Hot Replacement Workflow of the HDD/SSD With a Mirror Volume
Configuration
The workflow assumes the mirror volume is configured by the hardware RAID
function of the SPARC M12. If the mirror volume is configured by software RAID,
enable the removal of the HDD/SSD and then replace it. For details, see the manual
for the software being used.
Table 4-6
mirror volume configuration.
Table 4-6 Active/Hot Replacement Procedure of the HDD/SSD With a Mirror Volume
Work
Order
1
2
3
4
5
4.1.6
Active/Hot Replacement Workflow of the PCI
Expansion Unit
Table 4-7
expansion unit.
Table 4-7
PCI expansion unit are disconnected.
For the work of active/hot replacement of a PCIe card mounted in a PCI expansion
unit, see
For replacement procedures for FRUs (power supply unit and fan unit) that can be
replaced while the power cords of the PCI expansion unit are connected, see "7.1.1
Hot Replacement" in the PCI Expansion Unit for Fujitsu SPARC M12 and Fujitsu
M10/SPARC M10 Service Manual.
74
Fujitsu SPARC M12-2/M12-2S Service Manual ･ January 2023
shows the workflow for active/hot replacement of the HDD/SSD with a
Configuration
Task
Identifying the mounting location of the
faulty HDD/SSD
Removing the HDD/SSD from the
SPARC M12-2/M12-2S
Installing an HDD/SSD in the SPARC
M12-2/M12-2S
Incorporating the replacement HDD/SSD
into the system
Confirming that there is no problem with
the replacement HDD/SSD
shows the workflow for active/hot replacement of a FRU in a PCI
describes the procedure for replacing a FRU while the power cords of the
"4.1.2 Active/Hot Replacement Workflow of a PCIe
Reference
"14.2.9 Checking for a Failed Disk
Drive" in the Fujitsu SPARC M12 and
Fujitsu M10/SPARC M10 System Operation
and Administration Guide
"15.3.1 Removing an
HDD/SSD"
"15.4.1 Installing an
HDD/SSD"
"14.2.10 Replacing a Failed Disk Drive"
in the Fujitsu SPARC M12 and Fujitsu
M10/SPARC M10 System Operation and
Administration Guide
"10.5.3 Checking the FRU Status After
Maintenance"
Card."
Advertisement
Table of Contents
