Setting Operating Mode Via Program Load Frame: Detail-2 - Fujitsu BS2000 SE Series Operating Manual
Server unit /390
Hide thumbs
Also See for BS2000 SE Series:
- Basic operating manual (93 pages) ,
- Operating manual (89 pages) ,
- Quick manual (43 pages)
Table of Contents
Advertisement
Examples of SVP operation
4.5.6 Setting operating mode via PROGRAM LOAD FRAME: DETAIL-2
The operating mode can be set anew according to the setting using PROGRAM LOAD
FRAME: DETAIL-2. This selects the appropriate firmware for running BS2000 or VM2000.
The following are specified in the example below:
VM2000 operating mode
●
executing IPL after reloading the firmware
●
Requirement
You are in the PROGRAM LOAD FRAME: DETAIL-1 screen.
Invoke the PROGRAM LOAD FRAME: DETAIL-2 screen
Click on [PF9]
Ê
The PROGRAM LOAD FRAME: DETAIL-2 screen is displayed:
-VM MODE-
>*1 NATIVE
RA
Figure 33: PROGRAM LOAD FRAME: DETAIL-2 screen
VM MODE ==>
IPL EXECUTION ==>
66
----- PROGRAM LOAD FRAME: DETAIL-2 -----
==> 2
*2 AVM/EX
CL-0
-IPL EXECUTION-
==> 1
>*1 ENABLE
*2 DISABLE
*ENTER
*PF3
*PF9
CPU-0 CHP-0
Enter
for VM2000 operation
2
Enter
for executing IPL
1
Operating the service processor
E90L01G
EXECUTE
GO TO BASIC FRAME
GO TO DETAIL-1
RUN
[]-[]00
U41859-J-Z126-2-76
Advertisement
Table of Contents
