The Console Redirection Submenu - Fujitsu PRIMERGY RX300 S3 User Manual

Chapter 8 Configuring Hardware and Utilities

8.1.15 The Console Redirection Submenu

This submenu appears when you select [Console Redirection] from the Server menu.
Use this submenu to configure detailed settings for console redirection.
Main Advanced
Console Redirection:
Help
F1
Exit
Esc
Item
Console Redirection
Port
Baud Rate
Protocol
Flow Control
Mode
250
PhoenixBIOS Setup Utility
Security Server
Console Redirection
[Disabled]
-/+ Change Values
Select Item
Select Menu Enter Select > Sub-Menu
table: Items on the Console Redirection Submenu
Setting
• Disabled (Initial value)
• Enabled
• Serial 1 (Initial value)
• Serial 2
• 1200
• 2400
• 4800
• 9600 (Initial value)
• 19.2K
• 38.4K
• 57.6K
• 115.2K
• VT100
• VT100, 8-bit
• PC-ANSI, 7-bit
• PC-ANSI
• VT100+ (Initial value)
• None
• XON/XOFF
• CTS/RTS (Initial value)
• Standard
• Enhanced (Initial value)
Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
Description
Sets whether to enable or disable console
redirection.
Sets the serial port used for console redirection.
This submenu appears when [Console Redirection]
is set to "Enabled".
Sets the baud rate to be used for console redirection.
This submenu appears when [Console Redirection]
is set to "Enabled".
Sets the console type for console redirection.
This submenu appears when [Console Redirection]
is set to "Enabled".
Sets the flow control.
This submenu appears when [Console Redirection]
is set to "Enabled".
Sets the range of use for console redirection.
This submenu appears when [Console Redirection]
is set to "Enabled".