Show Spantree Uplinkfast - D-Link DWS-1008 Cli Reference Manual

Field
bridge forward delay
topology change initiator
last topology change occurred
topology change
topology change time
topology change detected
topology change count
topology change last recvd. from
dynamic max age transition
port BPDU ok count
msg age expiry count
link loading
BPDU in processing
num of similar BPDU's to process
received_inferior_bpdu
next state
src MAC count
total src MAC count
curr_src_mac
next_src_mac
See Also:
• clear spantree statistics

show spantree uplinkfast

Displays uplink fast convergence information for one VLAN or all VLANs.
vlan vlan-id
Defaults: None.
Access: All.
D-Link DWS-1008 CLI Manual
Value of the forwarding delay interval, in seconds, when this switch is the root or is
attempting to become the root.
Port number that initiated the most recent topology change.
System time when the most recent topology change occurred.
Value of the topology change flag in configuration BPDUs to be transmitted by this
switch on VLANs for which the switch is the designated bridge.
Time period, in seconds, during which BPDUs are transmitted with the topology
change flag set by this switch when it is the root bridge, after detection of a topology
change. It is equal to the sum of the switch's maximum age and forwarding delay
parameters.
Indicates whether a topology change has been detected by the switch.
Number of times the topology change has occurred.
MAC address of the bridge from which the switch last received a topology
change.
Number of times the maximum age parameter was changed dynamically.
Number of valid port BPDUs received.
Number of expired messages.
Indicates whether the link is oversubscribed.
Indicates whether BPDUs are currently being processed.
Number of similar BPDUs received on a port that need to be processed.
Indicates whether the port has received an inferior BPDU or a response to a Root
Link Query (RLQ) BPDU.
Port state before it is set by STP.
Number of BPDUs with the same source MAC address.
Number of BPDUs with all the source MAC addresses.
Source MAC address of the current received BPDU.
Other source MAC address from a different source.
Syntax: show spantree uplinkfast [vlan vlan-id]
VLAN name or number. If you do not specify a VLAN, MSS displays STP
statistics for all VLANs.
Description
8