D-Link DWS-1008 Cli Reference Manual page 525

ls
Displays a list of the boot prompt commands.
Syntax: ls
Defaults: None.
Access: Boot prompt.
Usage: To display help for an individual command, type help followed by the command name (for
example, help boot).
Examples: To display a list of the commands available at the boot prompt, type the following
command:
boot> ls
ls
help
autoboot
boot
change
create
delete
next
show
dir
fver
version
reset
test
diag
See Also:
• help
D-Link DWS-1008 CLI Manual
Display a list of all commands and descriptions.
Display help information for each command.
Display the state of, enable, or disable the autoboot option.
Load and execute an image using the current boot configuration profile.
Change the current boot configuration profile.
Create a new boot configuration profile.
Delete the current boot configuration profile.
Select the next boot configuration profile.
Display the current boot configuration profile.
Display the contents of the specified boot partition.
Display the version of the loadable image specified by device:filename.
Display HW and Bootstrap/Bootloader version information.
Reset the system.
Display the state of, enable, or disable the tests option.
Access the diagnostic command CLI.