Uninstall Soda Agent - D-Link DWS-1008 Cli Reference Manual

The table below describes the fields in the show version output.
Build Information
Build Suffix
Hardware
Serial number
BootLoader
Port/DAP
AP Model
Serial #
Versions

uninstall soda agent

Removes the contents of a directory containing SODA agent files.
Syntax: uninstall soda agent agent-directory directory
directory
Defaults: None.
Access: Enabled.
Usage: Use this command to remove a SODA agent directory and all of its contents. All files
in the specified directory are removed. The command removes the directory and its contents,
regardless of whether it contains SODA agent files.
Examples: The following command removes the directory sp1 and all of its contents:
DWS-1008# uninstall soda agent agent-directory sp1
This will delete all files in agent-directory, do you wish to continue? (y|n) [n]y
See Also:
• install soda agent
• set service-profile soda mode
D-Link DWS-1008 CLI Manual
Field
Factory timestamp of the image file.
Label Software version and build date.
Build suffix.
Model Build model.
Version information for the switch's motherboard and Power over Ethernet
(PoE) board.
Serial number of the switch.
Flash Flash memory version.
Kernel Kernel version.
Boot code version.
Port number connected to an access point.
AP model number.
AP serial number.
AP hardware, firmware, and software versions.
Directory on the switch where SODA agent files are to be removed.
Description
0